ANCIENT STAR SHAPED DRILL HOLES FOUND IN NEW YORK

Heptagonal (seven sides) and 7-point star shaped drill holes in rock. One tool made both shapes in stone. This is proof of ancient ultrasonic drilling. Photo by Glenn Kreisberg.

We commonly associate ancient stone artifacts with countries outside the USA, however, fine advanced stonework and machined rock remnants are found here in the United States.

Geographic borders used today were not known in the very distant past, therefore all territories are fair game for hunting ancient, machined artifacts both tangible and intangible.

(Above) A large, faceted basalt stone located in India was cut into a perfect cylinder hexadecagon; The top was destroyed?!  The large basalt cylinder was cut (faceted) with 16 equal and parallel facets.  This is a fine example of high-speed machining.

(Below) In 2023, I cut the same configuration as shown above, but with a pointed top at 51.8-degrees, following sacred geometry.  After recently purchasing the book, Malcom Bendall’s Notes, the ancient science is being understood clearer (unveiled).

3  holes were ultrasonically drilled into the base of the basalt cylinder using a 5-point star shape tube.  The 3 drill holes have different shapes (pentagonal and star shaped) even though the same tool was used.

(Above clockwise from top star) The top star shaped indentation with core intact is very sharp and shows the shape of the star tube. 

As the star tube drills deeper into the stone, the outside portion of the hole loses its star shape and becomes 5-sided or pentagonal.

The rock below shows ultrasonically created holes showing both a 7-point star and a 7-sided hole (heptagon).  One shaped metal tube will ultrasonically make both a 7-point star hole and a 7-sided heptagonal hole.

(Above) A 7-lobed star shaped and 7-sided hole found in New York. Photos by Glenn.

The star holes are in loose rock (tangible). Star holes found in large intact rock are intangible. Following the intangible leads you to the primary source of construction.

7-point star shaped drill holes are often accompanied with a 7-sided heptagonal hole because its the same tool making both shapes in the rock.

The same is true with 5-point star holes being accompanied with 5-sided pentagonal holes as was demonstrated in the Basalt stone.

Understanding how these ancient drill holes were created allows researchers to get a glimpse and better understand past advanced civilizations and their amazing stone working capabilities.

Ancient star and pentagonal holes are Star Graded (SG) from Excellent (SG-1) to poor (SG-5). 

When You Have Eliminated the Impossible Whatever Remains, However Improbable, Must Be the Truth. 

-Sir Arthur Ignatius Conan Doyle…….and Spock from Star Trek.

Shopping Cart